Reference Guide

116 | apflash [deprecated] Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
apflash [deprecated]
apflash all|{ap-group <group>}|{ap-name <name>}|{ip-addr <ipaddr>}|{wired-mac <macaddr>}
global|local [backup-partition] [server <ipaddr>]
Description
This command reflashes the specified AP. Starting with ArubaOS 6.1, this command can only be run by Dell
Technical Support or users in support mode.
Command History
Version Description
ArubaOS 3.0 Command introduced
ArubaOS 6.0 The global and local parameters were introduced.
ArubaOS 6.1 Command deprecated
ap debug radio-event-log
ap debug radio-event log [start|stop|show] [ap-name <name>|ip-addr <ip-addr>]| ip6-addr <ip6-
addr>] radio <0|1> size <size-of-log> events [all|ani|hex|rcfind|rcupdate|rx|size|text|tx
{<hexformat>}]
Description
Start and stops radio event log capture for debugging purposes, and sends a pktlog file to a dump server in the case of
stop.
Syntax
Parameter Description Range Default
start
Start wifi radio event log. — —
stop
Stop radio event log and send file to dump server. — —
ap-name
AP for radio event log capture. — —
ip-addr
IP address for radio event log capture. — —
ip6-addr
IPv6 address for radio event log capture. — —
radio
Radio index. 0 or 1 —
size
Radio log size. 1024-10485760
bytes(1KB-
10MB).
Default:314572-
8 bytes(3MB)