Reference Guide

show netservice
show netservice [<string>]
Description
Show network services
Syntax
Parameter Description
<string>
Name of a network service.
Usage guidelines
Issue this command without the optional <string> parameter to view a complete table of network services on the
controller. Include the <string> parameter to display settings for a single network service only.
Example
The following example shows the protocol type, ports and application-level gateway (ALG) for the DHCP service.
(host) #show netservice svc-dhcp
Services
--------
Name Protocol Ports ALG
---- -------- ----- ---
svc-dhcp udp 67 68
Related Commands
To configure an alias for network protocols, use the command netservice.
Command History
This command was available in ArubaOS 1.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on local and master
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show netservice | 1163