Reference Guide

show ntp status
show ntp status
Description
Show information for a NTP server.
Syntax
No parameters.
Example
The following example shows values for the primary NTP server.
(host) #show ntp status
system uptime: 7594
time since reset: 7594
bad stratum in packet: 0
old version packets: 113
new version packets: 0
unknown version number: 0
bad packet format: 0
packets processed: 110
bad authentication: 0
packets rejected: 0
system peer: 10.1.1.250
system peer mode: client
leap indicator: 00
stratum: 3
precision: -18
root distance: 0.03236 s
root dispersion: 0.06728 s
reference ID: [10.1.1.250]
reference time: cd45b701.bcbc05d5 Tue, Feb 17 2009 14:21:53.737
system flags: auth monitor ntp kernel stats
jitter: 0.005020 s
stability: 0.866 ppm
broadcastdelay: 0.003998 s
authdelay: 0.000000 s
The output of this command includes the following parameters:
Parameter Description
system uptime
The number of seconds the local NTP server has been associated with the
switch.
time since reset
The number of seconds since the last time the local NTP server was restarted.
bad stratum in packet
The number of NTP packets with a corrupted stratum bit.
old version packets
Number of packets that match the previous NTP version. A version number is in every
NTP packet.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ntp status | 1171