Reference Guide

1172 | show ntp status Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description
new version packets
Number of packets that match the current NTP version.
unknown version number
Number of packets with an unknown NTP version.
bad packet format
Number of NTP packets dropped due to an invalid packet format.
packets processed
Number of NTP packets received and processed by the controller.
bad authentication
Number of NTP packets that failed to be authenticated.
packets rejected
Number of NTP packets rejected because they had an invalid format.
system peer
The IP address of the peer NTP server.
system peer mode
The peer mode of this remote association:
l Symmetric Active
l Symmetric Passive
l Client
l Server
l Broadcast
leap indicator
This parameter indicates whether or not a leap-second should be inserted or removed
at the end of the last day of the current month.
l 00 no warning
l 01 +1 second (following minute has 61 seconds)
l 10 -1 second (following minute has 59 seconds)
stratum
The stratum level of the peer
precision
The advertised precision of the switch. This value can range from -4 and -20, inclusive.
root distance
Total round trip delay to the stratum 1 reference clock.
root dispersion
Total dispersion to the stratum 1 reference clock. This value is a cumulative measure of
all errors associated with the network hops and servers between the NTP server and its
stratum 1 server.
reference ID
IP address of the remote NTP server
reference time
Time when the local system clock was last set or corrected, in NTP timestamp
format.
system flags
This parameter displays any flags configured for this NTP entity.
jitter
The average magnitude of jitter between several time queries.
stability
The average magnitude of offset between several time queries
broadcastdelay
The broadcast delay of this NTP server association, in seconds.
authdelay
The authentication delay of this NTP server association, in seconds.
Related Commands
To configure an NTP server, use the command ntp server.