Reference Guide

1180 | show port link-event Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show port link-event
show port link-event
Description
Displays the link status on each of the port on the controller.
Syntax
No parameters.
Example
The output of this command shows the link status on all ports in the controller.
(host) # show port link-event
Slot/Port UP DOWN Slot/Port UP DOWN
--------- -- ---- --------- -- ----
2 / 0 0 0 2 / 1 0 0
2 / 2 0 0 2 / 3 1 1
2 / 4 0 0 2 / 5 0 0
2 / 6 0 0 2 / 7 1 1
2 / 8 0 0 2 / 9 0 0
2 / 10 10 9 2 / 11 2 1
2 / 12 1 0 2 / 13 0 0
2 / 14 1 0 2 / 15 6 5
2 / 16 5 4 2 / 17 9 8
2 / 18 1 0 2 / 19 5 4
2 / 20 0 0 2 / 21 4 4
2 / 22 2 2 2 / 23 9 9
2 / 24 0 0 2 / 25 0 0
3 / 0 24 23 3 / 1 0 0
3 / 2 0 0 3 / 3 0 0
3 / 4 1 0 3 / 5 1 0
3 / 6 0 0 3 / 7 0 0
3 / 8 94 94 3 / 9 0 0
3 / 10 0 0 3 / 11 5886 5886
3 / 12 49751 49750 3 / 13 50 49
3 / 14 2589 2588 3 / 15 228 227
3 / 16 2 1 3 / 17 2423 2423
3 / 18 8245 8244 3 / 19 5098 5098
3 / 20 74 73 3 / 21 2 2
3 / 22 1 0 3 / 23 0 0
3 / 24 0 0 3 / 25 0 0
Command History
This command was available in ArubaOS 3.3.2
Command Information
Platforms
Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers