Reference Guide

show port monitor
show port monitor
Description
Displays the list of ports that are configured to be monitored.
Syntax
No parameters.
Example
The output of this command shows the link status on all ports in the controller.
(host) # show port monitor
Monitor Port Port being Monitored
------------ --------------------
FE 1/10 FE 1/20
Command History
This command was available in ArubaOS 3.3.2
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show port monitor | 1181