Reference Guide

1194 | show profile-list ap Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show profile-list ap
show profile-list ap [enet-link-profile | mesh-cluster-profile |
mesh-ht-ssid-profile | mesh-radio-profile | regulatory-domain-profile |
snmp-profile | snmp-user-profile | system-profile | wired-ap-profile ]
Description
Displays the list of AP profiles.
Syntax
Parameter Description
enet-link-profile
Display a list of AP Ethernet link profiles.
mesh-cluster-profile
Display a list of mesh cluster profiles used by mesh nodes.
mesh-ht-ssid-profile
Display a list of mesh high-throughput SSID profiles used by mesh nodes.
mesh-radio-profile
Display a list of mesh radio profiles used by mesh nodes.
regulatory-domain-profile
Display a list of AP regulatory profiles.
snmp-profile
Display a list of SNMP profiles.
snmp-user-profile
Display a list of SNMPv3 user profiles.
system-profile
Display a list of AP system profiles.
wired-ap-profile
Display a list of wired AP profiles.
Example
The output of this command shows list of profiles that are invalid and also displays the error in those profiles.
(host) # show profile-list aaa authentication captive-portal
Captive Portal Authentication Profile List
------------------------------------------
Name References Profile Status
---- ---------- --------------
default 1
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers