Reference Guide

show references aaa authentication-server
crypto-local
show references aaa authentication-server {ldap <ldap-server-name>}|{radius <radius-server-
name>}|{tacacs <tacacs-server-name>} [page <number>] [start <number>]
Description
Display information about AAA authentication servers.
Syntax
Parameter Description
ldap <ldap-server-name>
Show the number of server groups that include references to the specified
LDAP server.
radius <radius-server-name>
Show the number of server groups that include references to the specified
RADIUS server.
tacacs <radius-server-name>
Show the number of server groups that include references to the specified
TACACS server.
page <number>
Include this optional parameter to limit output of this command to the
specified number of items.
start <number>
Include this optional parameter to start displaying the output of this
command at the specified index number.
Example
Issue this command to show the AAA server groups that include references to the specified server. The example
below shows that two server groups, default and rad, each include a single reference to the radius server rad01.
(host) #show references aaa authentication-server radius rad01
References to RADIUS Server "rad01"
-----------------------------------
Referrer Count
-------- -----
aaa server-group "default" server_group 1
aaa server-group "rad" server_group 1
Total References:2
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
Available on all platforms Base operating system Config mode on master and local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show references aaa authentication-server | 1207