Reference Guide

1222 | show rf arm-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show rf arm-profile
show rf arm-profile [<profile>]
Description
Show an Adaptive Radio Management (ARM) profile.
Syntax
Parameter Description
<profile>
Name of an ARM profile.
Usage Guidelines
Issue this command without the <profile> parameter to display the entire ARM profile list, including profile status
and the number of references to each profile. Include a profile name to display detailed configuration information for
that profile.
Examples
The example below shows that the controller has five configured ARM profiles. The References column lists the
number of other profiles with references to the ARM profile, and the Profile Status column indicates whether the
profile is predefined. User-defined profiles will not have an entry in the Profile Status column.
(host) # show rf arm-profile
Adaptive Radio Management (ARM) profile List
--------------------------------------------
Name References Profile Status
---- ---------- --------------
airwave 2
default 4
default-AP85 2
no-scanning 1
Wireless-rf-profile 1
Total:5.
This example displays the configuration settings for the profile Wireless_rf_profile.
(host) #show rf arm-profile default
Adaptive Radio Management (ARM) profile "Wireless_rf_profile"
-------------------------------------------------
Parameter Value
--------- -----
Assignment single-band
Allowed bands for 40MHz channels a-only
Client Aware Enabled
Max Tx EIRP 127 dBm
Min Tx EIRP 9 dBm
Multi Band Scan Enabled
Rogue AP Aware Disabled
Scan Interval 10 sec
Active Scan Disabled