Reference Guide

1226 | show rf dot11a-radio-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show rf dot11a-radio-profile
show rf dot11a-radio-profile [<profile>]
Description
Show an 802.11a Radio profile.
Syntax
Parameter Description
<profile>
Name of an 802.11a profile.
Usage Guidelines
Issue this command without the> <profileparameter to display the entire 802.11a Radio profile list, including
profile status and the number of references to each profile. Include a profile name to display detailed configuration
information for that profile.
Examples
The example below shows that the controller has three configured 802.11a Radio profiles. The References column
lists the number of other profiles with references to the 802.11a Radio profile, and the Profile Status column
indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status column.
(host) # show rf dot11a-radio-profile
802.11a radio profile List
--------------------------
Name References Profile Status
---- ---------- --------------
default 18
default-AP85 1
test 1
Total:3.
This example displays the configuration settings for the profile default.
(host) # show rf dot11a-radio-profile default
802.11a radio profile "default"
-------------------------------
Parameter Value
--------- -----
Radio enable Enabled
Mode ap-mode
High throughput enable (radio) Enabled
Channel 149+
Beacon Period 100 msec
Beacon Regulate Disabled
Transmit EIRP 15 dBm
Advertise 802.11d and 802.11h Capabilities Disabled
TPC Power 15 dBm
Spectrum load balancing Disabled
Spectrum Load balancing mode channel
Spectrum load balancing update interval (sec) 30 seconds
Spectrum load balancing threshold (%) 20 percent
Advertised regulatory max EIRP 0