Reference Guide

The output of this command includes the following information:
Parameter Description
Age Out: WIFI
The number of seconds for which a wifi device must stop sending a
signal before the spectrum monitor considers that device no longer
active on the network. The default value is 600 seconds.
Age Out: Generic Interferer
The number of seconds for which an unknown device must stop sending
a signal before the spectrum monitor considers that device no longer
active on the network. The default value is 30 seconds.
Age Out: Microwave
The number of seconds for which a microwave device must stop
sending a signal before the spectrum monitor considers that device no
longer active on the network. The default value is 15 seconds.
Note that this parameter is applicable to 2.4GHz spectrum monitor radios
only.
Age Out: Microwave (inverter
type)
The number of seconds for which an inverter microwave must stop
sending a signal before the spectrum monitor considers that device no
longer active on the network. The default value is 15 seconds.
Note that this parameter is applicable to 2.4GHz spectrum monitor radios
only.
Age Out: Video Device
The number of seconds for which a video device must stop sending a
signal before the spectrum monitor considers that device no longer
active on the network. The default value is 60 seconds.
Age Out: Audio Device
The number of seconds for which an audio device must stop sending a
signal before the spectrum monitor considers that device no longer
active on the network. The default value is 10 seconds.
Age Out: Cordless Phone Fixed
Frequency
The number of seconds for which a fixed frequency cordless phone must
stop sending a signal before the spectrum monitor considers that device
no longer active on the network. The default value is 10 seconds.
Age Out: Generic Fixed Frequency
The number of seconds for which a generic fixed frequency device must
stop sending a signal before the spectrum monitor considers that device
no longer active on the network. The default value is 10 seconds.
Age Out: Xbox
The number of seconds for which an Xbox device must stop sending a
signal before the spectrum monitor considers that device no longer
active on the network. The default value is 25 seconds.
Note that this parameter is applicable to 2.4GHz spectrum monitor radios
only.
Age Out: Bluetooth
The number of seconds for which a bluetooth device must stop sending
a signal before the spectrum monitor considers that device no longer
active on the network. The default value is 25 seconds.
Note that this parameter is applicable to 2.4GHz spectrum monitor radios
only.
Age Out: Cordless Network
Frequency Hopper
The number of seconds for which a frequency-hopping cordless network
device must stop sending a signal before the spectrum monitor
considers that device no longer active on the network. The default value
is 60 seconds.
Age Out: Cordless Base Frequency
Hopper
The number of seconds for which a frequency-hopping cordless phone
base must stop sending a signal before the spectrum monitor considers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show rf spectrum-profile | 1245