Reference Guide

show rrm dot11k admission-capacity
show rrm dot11k admission-capacity
Description
Displays the available admission capacity for voice traffic on an AP.
Syntax
No parameters.
Example
The output of this command shows the available admission capacity for voice traffic on all APs.
(host) # show rrm dot11k admission-capacity
802.11K Available Admission Capacity for Voice
----------------------------------------------
Flags: B: Bandwidth based CAC, C: Call-count based CAC
D: CAC Disabled, E: CAC Enabled
AP Name IP Address Freq Band Chan Total Available Flags
------- ---------- --------- ---- ----- --------- -----
r-wing-94 10.16.12.247 5 GHz 40 31250 0 EC
r-wing-94 10.16.12.247 2.4 GHz 11 31250 0 EC
Num APs:2
Command History
This command was available in ArubaOS 3.4
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show rrm dot11k admission-capacity | 1253