Reference Guide

show storage
show storage
Description
Displays the storage information on the controller.
Syntax
No parameters.
Example
The output of this command shows the storage details on the controller.
(host) # show storage
Filesystem Size Used Available Use% Mounted on
/dev/root 57.0M 54.6M 2.3M 96% /
none 70.0M 2.0M 68.0M 3% /tmp
/dev/hda3 149.7M 9.3M 132.6M 7% /flash
/dev/usb/flash3 1.5G 168.6M 1.3G 12% /flash
/dev/usbdisk/2 3.5G 71.4M 3.2G 2% /mnt/usbdisk/2
/dev/usbdisk/1 3.9G 131.0M 3.8G 3% /mnt/usbdisk/1
The number at the end of the USB device's name is the partition. Unlike the controller's flash, the USB device has
more than two partitions; not just 0 and 1. When copying a file from a USB device, you must know which partition
the target file is on.
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show storage | 1277