Reference Guide

show voice call-cdrs
show voice call-cdrs [bssid <value> | cid <value> | count <number> | detail | essid <value> |
extn <value> | ip <ip-address> | proto {sip | svp | noe | sccp | vocera | h323} | rtpa | sta
<mac-address>]
Description
Displays detailed call records of voice client.
Syntax
Parameter Description
bssid
Filter records based on BSSID of voice clients.
cid
View the detailed records filtered on the CDR Id.
count
Specify the number of records to be displayed by entering a number.
detail
Include this parameter to view the following additional information for each call
record.
l Reason
l Codec
l Band
l Setup Time (sec)
l Re-Assoc
l Initial-BSSID
l Initial-ESSID
l Initial-AP Name
essid
Filter records based on ESSID of voice clients.
extn
View detailed records for a particular extension number.
ip
View detailed records of voice client using its IP address.
proto
View detailed records filtered on protocol.
rtpa
Include this parameter to view the voice call quality reports based on the call quality
analysis from the RTP media streams.
NOTE: This parameter is applicable only if Real Time Call Quality Analysis is enabled
on the voice calls.
sta
View the detailed records filtered on the MAC address of a voice client.
Example
The output of this command shows detailed call records filtered by SIP protocol and limited to 5 entries.
(host) #show voice call-cdrs proto sip count 5 detail
Voice Client(s) CDRs (Detail)
-----------------------------
CDR Id Client IP Client Name ALG Dir Called/Calling Party Status Dur(sec) Orig
time R-value Reason Codec Band Setup Time(sec) Re-Assoc Initial-BSSID
Initial-ESSID Initial-AP Name
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show voice call-cdrs | 1313