Reference Guide

1358 | show wlan dot11k-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show wlan dot11k-profile
show wlan dot11k-profile [<profile>]
Description
Show a list of all 802.11k profiles, or display detailed configuration information for a specific 802.11k profile.
Syntax
Parameter Description
<profile>
Name of an 802.11k profile.
Usage Guidelines
Issue this command without the <profile> parameter to display the 802.11k profile list, including profile status and
the number of references to each profile. Include a profile name to display detailed configuration information for that
profile.
Examples
The example below shows that the controller has two configured 802.11k profiles. The References column lists the
number of other profiles with references to the 802.11k profile, and the Profile Status column indicates whether the
profile is predefined. (User-defined profiles will not have an entry in the Profile Status column.)
(host) #show wlan dot11k-profile
802.11K Profile List
--------------------
Name References Profile Status
---- ---------- --------------
default 8
11kprofile2 1
Total: 2
The following example shows configuration settings defined for the profile default.
(host) #show wlan dot11k-profile default
802.11K Profile "default"
-------------------------
Parameter Value
--------- -----
Advertise 802.11K Capability Disabled
Forcefully disassociate on-hook voice clients Disabled
Measurement Mode for Beacon Reports beacon-table
Configure specific channel for Beacon Requests Disabled
Channel requested for Beacon Reports in 'A' band 36
Channel requested for Beacon Reports in 'BG' band 1
Time duration between consecutive Beacon Requests 60 sec
Time duration between consecutive Link Measurement Requests 60 sec
Time duration between consecutive Transmit Stream Measurement Requests 90 sec
The output of this command includes the following data columns: