Reference Guide

1426 | threshold Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
threshold
threshold
controlpath-cpu <percentage>
controlpath-memory <percentage>
datapath-cpu <percentage>
no-of-APs <percentage>
no-of-locals <percentage>
total-tunnel-capacity <percentage>
user-capacity <percentage>
no ...
Description
This command configures controller capacity thresholds which, when exceeded, will trigger alerts.
Syntax
Parameter Description
controlpath-cpu <percentage>
Set an alert threshold for controlpath CPU capacity. The
<percentage> parameter is the percentage of the total
controlpath CPU capacity that must be exceeded before the alert
is sent.
The default threshold for this parameter is 80%.
controlpath-memory
<percentage>
Set an alert threshold for controlpath memory consumption. The
<percentage> parameter is the percentage of the total memory
capacity that must be exceeded before the alert is sent.
The default threshold for this parameter is 85%.
datapath-cpu <percentage>
Set an alert threshold for datapath CPU capacity. The
<percentage> parameter is the percentage of the total datapath
CPU capacity that must be exceeded before the alert is sent.
The default threshold for this parameter is 30%.
no-of-APs <percentage>
The maximum number of APs that can be connected to a
controller is determined by that controller’s model type and
installed licenses. Use this command to trigger an alert when the
number of APs currently connected to the controller exceeds a
specific percentage of its total AP capacity.
The default threshold for this parameter is 80%.
no-of-locals <percentage>
Set an alert threshold for the master controller’s capacity to
support remote nodes and local controllers.
A master controller can support a combined total of 256 remote
nodes and local controllers. The <percentage> parameter is the
percentage of the total master controller capacity that must be
exceeded before the alert is sent. The default threshold for this
parameter is 80%.
total-tunnel-capacity
<percentage>
Set an alert threshold for the controller’s tunnel capacity. The
<percentage> parameter is the percentage of the controller’s
total tunnel capacity that must be exceeded before the alert is
sent.
The default threshold for this parameter is 80%