Reference Guide

Parameter Description Range Default
request-info <request-info>
This option is used to indicate the contents of the
Request Information IE that could be present in
the Beacon Report Request frame. The Request
Information IE is present for all Measurement
Modes except the 'Beacon Table' mode. It
consists of a list of Element IDs that should be
included by the client in the response frame.
Any valid
element
ID in the
x/y/z
format.
For
example,
0/21/22.
—
rpt-condtion <rpt-condition>
This option is used to indicate the value for the
"Reporting Condition" field in the Beacon
Reporting Information sub-element present in the
Beacon Report Request frame.
0 - 255 0
rpt-detail
This option is used to indicate the value for the
"Detail" field in the Reporting Detail sub-element
present in the Beacon Report Request frame.
— Disabled
ssid <ssid>
A unique character string (sometimes referred to
as a network name), consisting of no more than
32 characters. The SSID is case-sensitive (for
example, WLAN- 01).
— —
Usage Guidelines
The Beacon Report Request profile is configured under the 802.11K profile.
Example
The following commands configure the parameters under the bcn-rpt-req-profile.
(host) (config) #wlan bcn-rpt-req-profile default
(host) (Beacon Report Request Profile "default") #channel 9
(host) (Beacon Report Request Profile "default") #interface 1
(host) (Beacon Report Request Profile "default") #no measure-dur-mandatory
(host) (Beacon Report Request Profile "default") #measure-duration 100
(host) (Beacon Report Request Profile "default") #measure-mode active-all-ch
(host) (Beacon Report Request Profile "default") #random-interval 100
(host) (Beacon Report Request Profile "default") #reg-class 12
(host) (Beacon Report Request Profile "default") #rpt-condition 2
(host) (Beacon Report Request Profile "default") #no rpt-detail
(host) (Beacon Report Request Profile "default") #request-info 0/21/22
(host) (Beacon Report Request Profile "default") #ssid aruba-ap
Command History
This command is introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Configuration mode on master and local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide wlan bcn-rpt-req-profile | 1483