Reference Guide

1498 | wlan rrm-ie-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
wlan rrm-ie-profile
wlan rrm-ie-profile <profile-name>
bss-aac-ie
clone
country-ie
enabled-capabilities-ie
no
pwr-constraint-ie
qbss-load-ie
quiet-ie
tpc-report-ie
Description
Configure an radio resource management RRMIEprofile to define the information elements advertised by an AP
with 802.11k support enabled.
Syntax
Parameter Description
bss-aac-ie
The AP will advertise in beacon and probe responses the BSS Available Admission
Capacity (ACC) IE, which contains information about the admission capabilities for each
User Priority / Access Category
clone
Copy the settings of an existing RRM IEprofile.
country-ie
The AP will advertise in beacon and probe responses the device's regulatory domain.
enabled-capabilities-ie
The AP will advertise in beacon and probe responses support for radio measurements in
a device.
no ...
Disables the transmission of an IE in this profile.
pwr-constraint-ie
The AP will advertise in beacon and probe responses the regulatory maximum transmit
power for that current channel.
qbss-load-ie
The AP will advertise in beacon and probe responses the QoS Basic Service Set (QBSS)
Load IE, which contains information on the current station count, channel utilization and
available admission capacity levels in the QBSS
quiet-ie
The AP will advertise in beacon and probe responses the Quiet IE, which is used to
silence the channel for measurement purposes. When an AP uses a quiet IE to schedule
a quiet interval, stations may not transmit on that channel during the quiet interval.
tpc-report-ie
The AP will advertise in beacon and probe responses information about its transmit
power controls.
Usage Guidelines
ArubaOS supports RRM Information Elements (IEs) for APs with 802.11k support enabled. All IEs are sent by
default.
Example
The following command prevents the APfrom advertising the country IE.