Reference Guide

opmode wpa2-aes
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.2 The wmm-ts-min-inact-int parameter was introduced. The wpa2-preauth parameter was
removed,
ArubaOS 3.3 Support for the high-throughput IEEE 802.11n standard was introduced including the ht-
ssid-profile parameter and various rate changes.
ArubaOS 3.3.1 Support for configurable WMM AC mapping was introduced including the wmm-be-
dscp, wmm-bk-dscp, wmm-vi-dscp, and wmm-vo-dscp parameters.
ArubaOS 3.4 The deny-bcast and disable-probe-retry parameters were introduced. The drop-mcast
parameter was deprecated.
ArubaOS 3.4.1 License requirements changed in ArubaOS 3.4.1, so the command required the PEF
license instead of the Voice Services Module license required in earlier versions.
ArubaOS 6.1 The opmode options wpa2-aes-gcm-128 and wpa2-aes-gcm-256 were introduced. These
parameters require the ACR license.
The qbss-load-enable option is included.
ArubaOS 6.1.4.1 The
advertise-ap-name
parameter was added.
ArubaOS 6.2 The advertise-location and enforce-user-vlan parameters were added.
Command Information
Platforms Licensing Command Mode
All platforms, except for the
noted opmode parameters.
Base operating system, except for
the noted parameters
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide wlan ssid-profile | 1507