Reference Guide

1520 | wlan voip-cac-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
wlan voip-cac-profile
wlan voip-cac-profile <profile-name>
bandwidth-cac
bandwidth-capacity <bandwidth-capacity>
call-admission-control
call-capacity
call-handoff-reservation <percent>
clone <profile-name>
disconnect-extra-call
no ...
send-sip-100-trying
send-sip-status-code client|server <code>
wmm_tspec_enforcement
wmm_tspec_enforcement_period <seconds>
Description
This command configures a Voice over IP (VoIP) call admission control (CAC) profile.
Syntax
Parameter Description Range Default
<profile-name>
Name of this instance of the profile. The name
must be 1-63 characters.
— “default”
bandwidth-cac
Select the desired call admission control (CAC)
Mechanism:
l Disable - CAC is based on Call Counts
l Enable - CAC should be based on
Bandwidth.
— disabled
bandwidth-capacity
Define the maximum bandwidth that can be
handled by one radio, in kbps. The default
value is 2000 kbps (2 Mbps)
— —
<bandwidth-capacity>
Maximum bandwidth that can be handled by
one radio, in kbps. The default value is 2000
kbps (2 Mbps)
1-600000 2000
call-admission-
control
Enables or disables WiFi VoIP Call Admission
Control features.
— disabled
call-capacity
Number of simultaneous calls that can be
handled by one radio.
2-8000 10
call-handoff-reservation
Percentage of call capacity reserved for
mobile VoIP clients on call.
0-100 20%
clone
Name of an existing VoIP CAC profile from
which parameter values are copied.
— —
disconnect-ex
tra-call
Disconnects calls that exceed the high
capacity threshold by sending a
deauthentication frame.
— disabled