Reference Guide

Parameter Description Range Default
no
Negates any configured parameter. — —
send-sip-100-
trying
Enables sending of SIP 100 - trying messages to
a call originator to indicate that the call is
proceeding. This is useful when the SIP invite
may be redirected through a number of servers
before reaching the controller.
— enabled
send-sip-status-code
client|server <code>
Use this parameter with the client or server
options to drop a SIP Invite and send status
code back to the client or server. You must also
include one of the following codes:
l 480: Temporary Unavailable
l 486: Busy Here
l 503: Ser vice Unavailable
l none: Don't send SIP status code
— 486
wmm_tspec_en
forcement
Enables validation of TSPEC requests for CAC. — disabled
wmm_tspec_en
forcement_
period
Maximum time for the station to start the call
after the TSPEC request.
1-100 1 second
Usage Guidelines
The VoIP CAC profile prevents any single AP from becoming congested with voice calls.
Example
The following command enables VoIP CAC:
(host) (config) #wlan voip-cac-profile cac1
call-admission-control
disconnect-extra-call
Command History
Version Change
ArubaOS 3.0 Command introduced
ArubaOS 3.4 The following parameters were deprecated:
l active-load-balancing
l high-threshold-capacity
l noe-call-capacity
l sccp-call-capacity
l svp-call-capacity
l vocera-call-capacity
The following parameters were introduced:
l bandwidth-cac
l bandwidth-capacity
l call-capacity
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide wlan voip-cac-profile | 1521