Reference Guide

ap system-profile
ap system-profile <profile>
aeroscout-rtls-server ip-addr <ipaddr> port <port> [include-unassoc-sta]
am-scan-rf-band [a | g | all]
bkup-lms-ip <ipaddr>
bkup-lms-ipv6 <ipaddr>
bootstrap-threshold <number>
clone <profile>
dns-domain <domain>
double-encrypt
dump-server <server>
heartbeat-dscp <number>
led-mode normal|off
lms-hold-down-period <seconds>
lms-ip <ipaddr>
lms-ipv6 <ipaddr>
lms-preemption
maintenance-mode
max-request-retries <number>
mtu <bytes>
native-vlan-id <vlan>
no ...
number_ipsec_retries
rap-bw-total
rap-bw-resv-1
rap-bw-resv-2
rap-bw-resv-3
rap-dhcp-default-router <ipaddr>
rap-dhcp-dns-server <ipaddr>
rap-dhcp-lease <days>
rap-dhcp-pool-end <ipaddr>
rap-dhcp-pool-netmask <netmask>
rap-dhcp-pool-start <ipaddr>
rap-dhcp-server-id <ipaddr>
rap-dhcp-server-vlan <vlan>
rap-local-network-access
request-retry-interval <seconds>
rf-band <band>
rtls-server ip-addr <ipaddr> port <port> key <key> station-message-frequency <seconds>
[include-unassoc-sta]
session-acl <acl>
syscontact <name>
telnet
Description
This command configures an AP system profile.
Syntax
Parameter Description Range Default
<profile> Name of this instance of the profile. The name must be
1-63 characters.
— “default”
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide ap system-profile | 155