Reference Guide

Parameter Description
ap
Clear all AP related information.
arm
Clear information on AP.
mesh
Clear all mesh commands.
port
Toggle the link on the specified port.
remote
Clear all information related to remote configuration.
arp
Clear all ARP table information. You can either clear all information or enter the IP
address of the ARP entry to clear a specific value.
counters
Clear all interface configuration values.
fastethernet
Clears configuration related to fastethernet ports.
gigabitethernet
Clears configuration related to fastethernet ports.
tunnel
Clears all tunnel configuration values on interface ports.
vrrp
Clears all VRRP configuration values on interface ports.
datapath
Clears all configuration values and statistics for the following datapath modules.
l application
l bridge
l bwm
l crypto
l dma
l frame
l hardware
l ip-reassembly
l maintenance
l message-queue
l route
l route-cache
l session
l station
l tunnel
l user
l wifi-reassembly
l wmm
dot1x
Clears all 802.1X specific counters and supplicant statistics. Use the following
parameters:
l counters
l supplicant-info
fault
Clears all SNMP fault configuration.
gap-db
Clears global AP database. This command is often used to clear all stale AP records.
Use the following parameters:
l ap-name
l lms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide clear | 179