Reference Guide

278 | ids ap-classification-rule change Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
ids ap-classification-rule change
id-classification-rule <rule-name>
check-min-discovered-aps
classify-to-type [neighbor | suspected-rogue]
clone
conf-level-incr
discovered-ap-cnt <discovered-ap-cnt>
match-ssids
no
snr-max <value>
snr-min <value>
ssid <ssid>
Description
Configure the AP classification rule profile.
Syntax
Parameter Description Range Default
<rule-name>
Enter the AP classification rule profile name. — —
check-min-discovered-aps
Have the rule check for the minimum number of
APs
true
false
true
classify-to-type
[neighbor | suspected-rogue]
Specify if the type the AP will be classified,
neighbor or suspected-rogue, if the rule is
matched.
— suspected-
rogue
clone
Copy data from another AP classification rule
profile
— —
conf-level-incr
Increase the confidence level (in percentage)
when the rule matches
0-100 5
discovered-ap-cnt
<discovered-ap-cnt>
Enter the keyword discovered-ap-cnt followed
by the number of APs to be discovered.
0-100 0
match-ssids
Match SSIDs; match or do not match true
false
false
no
Negates any configured parameter — —
snr-max <value>
Use the maximum SNR value 0-100 0
snr-min <value>
Use the minimum SNR value 0-100 0
ssid <ssid>
Enter the keyword ssid followed by the SSID
string to be matched or excluded
— —
Usage Guidelines
AP classification rule configuration is performed only on a master controller. If AMP is enabled via the mobility-
manager command, then processing of the AP classification rules is disabled on the master controller. A rule is