Reference Guide

identified by its ASCII character string name (32 characters maximum). The AP classification rules have one of the
following specifications:
l SSID of the AP
l SNR of the AP
l Discovered-AP-Count or the number of APs that can see the AP
Once you have created an AP classification rule, but must ienable it by adding it to the IDS AP Matching Rules
profile:
ids ap-rule-matching
rule-name <name>
SSID specification
Each rule can have up to 6 SSID parameters. If one or more SSIDs are specified in a rule, an option of whether to
match any of the SSIDs, or to not match all of the SSIDs can be specified. The default is to check for a match
operation.
SNR specification
Each rule can have only one specification of the SNR. A minimum and/or maximum can be specified in each rule
and the specification is in SNR (db).
Discovered-AP-Count specification
Each rule can have only one specification of the Discovered-AP-Count. Each rule can specify a minimum or
maximum of the Discovered-AP-count. The minimum or maximum operation must be specified if the Discovered-
AP-count is specified. The default setting is to check for the minimum discovered-AP-count.
Example
The following example configures the AP Configuration Rule Profile named “rule1”, then enables the rule by adding
it to the IDS AP Matching Rules profile.
(host) (config) #ids ap-classification-rule rule1
(host) (IDS AP Classification Rule Profile "rule1") #check-min-discovered-aps
(host) (IDS AP Classification Rule Profile "rule1") #classify-to-type neighbor
(host) (IDS AP Classification Rule Profile "rule1") !
(host) (config) #ap-rule-matching rule-name rule1
Command History
Release Modification
ArubaOS 6.0 Command introduced
Command Information
Platforms Licensing Command Mode
Available on all platforms Requires the RFprotect license Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide ids ap-classification-rule change | 279