Reference Guide

Parameter Description
Ran-
ge
Defa-
ult
clone
Name of an existing IDS
general profile from which
parameter values are copied.
— —
ids-events [logs-and-traps | logs-only | none |
traps-only]
Enable or disable IDS event
generation from the AP. Event
generation from the AP can
be enabled for syslogs, traps,
or both. This does not affect
generation of IDS correlated
events on the switch.
— logs-
and-
traps
min-pot-ap-beacon-rate
Minimum beacon rate
acceptable from a potential
AP, in percentage of the
advertised beacon interval.
0-100 25%
min-pot-ap-monitor-time
Minimum time, in seconds, a
potential AP has to be up
before it is classified as a real
AP.
2-
36000
2
sec-
onds
mobility-manager-rtls
Enable/disable RTLS
communication with the
configured mobility-manager
ena-
bled
dis-
abled
dis-
abled
mon-stats-update-interval
Time interval, in seconds, for
AP to update the switch with
stats for monitored devices.
Minimum is 60.
60-
36000-
0
sec-
onds
60
sec-
onds
no
Negates any configured
parameter.
— —
send-adhoc-info-to-controller
Enable or disable sending
Adhoc information to the
controller from the AP.
ena-
ble
dis-
able
dis-
able
signature-quiet-time
After a signature match is
detected, the time to wait, in
seconds, to resume checking.
60-
36000-
0
sec-
onds
900
sec-
onds
sta-inactivity-timeout
Time, in seconds, after which
a station is aged out.
30-
36000-
0
sec-
onds
60
sec-
onds
sta-max-unseen-timeout
Ageout time, in seconds,
since station was last seen.
Minimum is 5.
5-
36000
sec-
onds
5
sec-
onds
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide ids general-profile | 289