Reference Guide

Interface cellular
interface cellular ip access-group <name> session
Description
This command allows you to specify an ingress or egress ACL to the cellular interface of an EVDO modem.
Syntax
Parameter Description
<name>
Enter the name or number of the access group you want to apply to the EVDO modem.
Example
(host) (config-cell)#ip access-group 3 session
Related Command
Command Description
show interface cellular access-
group
List the Access groups configured on the cellular interface
Command History
Release Modification
ArubaOS 5.0 Command introduced
Command Information
Platforms Licensing Command Mode
W-600 series Base operating system Configuration Mode (config-cell)
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide Interface cellular | 313