Reference Guide

322 | interface-profile voip-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
l The port-channel mode on the Cisco switch must be “on”.
Example
The following command configures a port channel:
(host) (config) #interface port channel 7
add fastethernet 1/1
add fastethernet 1/2
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.4 The trusted VLAN and ip access-group session vlan parameters were introduced.
ArubaOS 3.4.1 The trusted vlan <word> parameter was added.
Command Information
Platforms Licensing Command Mode
This command is available in the
base operating system. The
ipaccess-group parameter requires
the PEFNG license. The xsec
parameter requires the xSec license.
Config mode on master and local controllers
interface-profile voip-profile
interface-profile voip-profile <profile-name>
clone <source>
no{...}
voip-dot1p <priority>
voip-dscp <value>
voip-mode [auto-discover | static]
voip-vlan <VLAN-ID>
Description
This command creates a VoIP profile that can be applied to any interface or an interface group.
Syntax
Parameter Description Range Default
<profile-name>
Name of the VoIP profile. 1-32 char-
acters;
cannot
begin
with a
numeric
—