Reference Guide

Parameter Description Range Default
char-
acter
voip-dot1p <priority>
Specifies the dot1p priority. — —
voip-dscp <value>
Specifies the DSCP value for the voice VLAN — —
voip-mode [auto-discover |
static]
Specifies the mode of VoIP operation.
l auto-discover - Operates VoIP on auto discovery
mode.
l static - Operates VoIP on static mode.
— static
voip-vlan <vlan id>
Specifies the Voice VLAN ID.
— —
Usage Guidelines
Use this command to create VoIP VLANs for VoIP phones. Creating a VoIP profile does not apply the
configuration to any interface or interface group. To apply the VoIP profile, use the interface gigabitethernet
and interface-group commands.
Example
The following command configures a VoIP profile:
interface-profile voip-profile VoIP_PHONES
voip-dot1p 100
voip-dscp 125
voip-mode auto-discover
voip-vlan 126
Command History
This command was introduced in ArubaOS
Release Modification
ArubaOS 6.2 Command introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master and local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide interface-profile voip-profile | 323