Reference Guide

ip domain-name
ip domain-name <name>
Description
This command configures the default domain name.
Syntax
Parameter Description
domain-name
Name used to complete unqualified host names. Do not specify the leading dot (.).
Usage Guidelines
The controller uses the default domain name to complete hostnames that do not contain domain names. You must
have at least one domain name server configured on the controller (see "ip name-server" on page 378).
Example
The following command configures the default domain name:
(host) (config) #ip domain-name yourdomain.com
Command History
This command was available in ArubaOS 3.0.
Command Information
Platform License Command Mode
Available on all platforms Available in the base operating system Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide ip domain-name | 363