Reference Guide

366 | ip local Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
ip local
ip local pool <name> <start-ipaddr> [<end-ipaddr>]
Description
This command configures a local IP pool for Layer-2 Tunnel Protocol (L2TP).
Syntax
Parameter Description
pool
Name for the address pool.
<start-ipaddr>
Starting IP address for the pool.
<end-ipaddr>
(Optional) Ending IP address for the pool.
Usage Guidelines
VPN clients can be assigned IP addresses from the L2TP pool.
Example
The following command configures an L2TP pool:
(host) (config) #ip local pool 10.1.1.1 10.1.1.99
Command History
This command was available in ArubaOS 3.0.
Command Information
Platform License Command Mode
Available on all platforms Available in the base operating system Config mode on master controllers