Reference Guide

aaa authentication-server windows
aaa authentication-server windows <windows_server_name>
clone <source>
domain <domain>
enable
host <ipaddr>
no
Description
This command configures a windows server for stateful-NTLM authentication.
Syntax
Parameter Description
<windows_server_name>
Name of the windows server. You will use this name when you add the windows
server to a server group.
clone <source>
Name of a Windows Server from which you want to make a copy.
domain <domain>
The Windows domain for the authentication server.
enable
Enables the Windows server.
host <ipaddr>
IP address of the Windows server.
no
Delete command.
Usage Guidelines
You must define a Windows server before you can add it to one or more server groups. You create a server group for
a specific type of authentication (see "aaa server-group" on page 82). Windows servers are used for stateful-NTLM
authentication.
Example
The following command configures and enables a windows server:
aaa authentication-server windows IAS_1
host 10.1.1.245
enable
Command History
This command was available in ArubaOS 3.4.1
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide aaa authentication-server windows | 37