Reference Guide

406 | local-userdb add Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description Range Default
opt-field-2
Same as opt-field-1. — —
opt-field-3
Same as opt-field-1. — —
opt-field-4
Same as opt-field-1. — —
remote-ip
IP address assigned to the remote peer.
role
Role for the user. This role takes effect when the internal
database is specified in a server group profile with a server
derivation rule. If there is no server derivation rule
configured, then the user is assigned the default role for the
authentication method.
— guest
sponsor-dept
The guest sponsor’s department name
NOTE: A sponsor is the guest's primary contact for the visit.
— —
sponsor-email
The sponsor’s email address. — —
sponsor-fullname
The sponsor’s full name. — —
sponsor-name
The sponsor’s name. — —
start-time
Date and time, in mm/dd/yyy and hh:mm format, the guest
account begins.
— —
Usage Guidelines
When you specify the internal database as an authentication server, client information is checked against the user
accounts in the internal database. You can modify an existing user account in the internal database with the local-
userdb modify command, or delete an account with the local-userdb del command.
By default, the internal database in the master controller is used for authentication. Issue the aaa
authentication-server internal use-local-switch command to use the internal database in a local
controller; you then need to add user accounts to the internal database in the local controller.
Example
The following command adds a user account in the internal database with an automatically-generated username and
password:
(host) #local-userdb add generate-username generate-password expiry duration 480
The following information is displayed when you enter the command:
GuestConnect
Username: guest4157
Password: cDFD1675
Expiration: 480 minutes
Related Commands
Command Description Mode
show local-userdb
Use this command to show the parameters displayed in Enable and Config modes