Reference Guide

408 | localip Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
localip
localip <ipaddr>
ipsec <key>
Description
This command configures the IP address and preshared key for the local controller on a master controller.
Syntax
Parameter Description
<ipaddr>
IP address of the local controller. Use the 0.0.0.0 address to configure a global preshared key
for all inter-controller communications.
ipsec <key>
To establish the master-local IPsec tunnel using IKEv1, enter a preshared key between 6-64
characters.
Usage Guidelines
Use this command on a master controller to configure the IP address and preshared key or certificates for
communication with a local controller. On the local controller, use the masterip command to configure the IP
address and preshared key for the master controller.
If your master and local controllers use a pre-shared key for authentication, they will create the IPsec tunnel using
IKEv1.
Example
The following command configures the local controller with a pre-shared key:
(host) (config) #localip 0.0.0.0 ipsec gw1234xyz
Command History
Command introduced in ArubaOS 3.0.
Command Information
Platform License Command Mode
Available on all platforms Available in the base operating system Config mode on master controllers