Reference Guide

aaa authentication via auth-profile
aaa authentication via auth-profile <profile>
clone <source>
default-role <default-role>
desc <description>
max-authentication-failures <max-authentication-failures>
no
server-group <server-group>
Description
This command configures the VIA authentication profile.
Syntax
Parameter Description Default
clone <source>
Name of an existing profile from which
configuration values are copied.
-
default-role <default-role>
Name of the default VIA authentication
profile.
-
desc <description>
Description of this profile for reference. -
max-authentication-failures <max-
authentication-failures>
Number of times VIA will prompt user to
login due to incorrect credentials. After the
maximum authentication attempts failures
VIA will exit.
3
server-group <server-group>
Server group against which the user is
authenticated.
-
Usage Guidelines
Use this command to create VIA authentication profiles and associate user roles to the authentication profile.
Example
(host) (config) #aaa authentication via auth-profile default
(host) (VIA Authentication Profile "default") #default-role example-via-role
(host) (VIA Authentication Profile "default") #desc "Default VIA Authentication Profile"
(host) (VIA Authentication Profile "default") #server-group "via-server-group"
Command History
Command introduced in 5.0
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master or local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide aaa authentication via auth-profile | 43