Reference Guide

ntp authenticate
ntp authenticate
Description
This command enables or disables NTP authentication.
Syntax
No parameters.
Usage Guidelines
Network Time Protocol (NTP) authentication enables the controller to authenticate the NTP server before
synchronizing local time with server. This helps identify secure servers from fradulent servers. This command has to
be enabled for NTP authentication to work.
Example
The following command configures an NTP server:
(host) (config) #ntp authenticate
Command History
Release Modification
ArubaOS 6.1 Command introduced
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide ntp authenticate | 457