Reference Guide

remote-node-localip
localuserdb
remote-node-localip <remote-node-switch-ip> ipsec KEY <keyword>
Description
This command configures the switch-IP address and preshared key for the local Remote Node on a master Remote
Node.
Syntax
Parameter Description
<remote-node-switch-
ip>
Switch-IP address of the local remote node. Use the 0.0.0.0 address to configure a global
preshared key for all inter-controller communications.
ipsec <keyword>
Preshared key, which must be between 6-64 characters.
Usage Guidelines
Use this command on a master remote node to configure the switch-IP address and preshared key for
communication with a local remote node. On the local remote node, the pre-shared key is configured in the setup
wizard during the initial boot. The pre-shared keys for both the master and local controllers must match.
On the local remote node, use the remote-node-masterip command to configure the switch-IP address and preshared
key for the master remote node.
Example
The following command configures the local remote node on a master remote node:
(host) (config) remote-node-localip 172.16.0.254 ipsec rhyopevs
Command History
Introduced in ArubaOS 6.0
Command Information
Platform License Command Mode
Available on all platforms Available in the base operating system Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide remote-node-localip | 501