Reference Guide

service
service [dhcp] [network-storage] [print-server]
Description
This command enables the DHCP server on the controller.
Syntax
Parameter Description Default
dhcp
Enables the DHCP server disabled
network-storage
Enables the NAS service disabled
print-server
Enables the printer service disabled
Usage Guidelines
You can enable and configure DHCP, DHCPv6, network-storage or print server in the controller to provide the
following:
l DHCP: IP addresses to wireless clients if an external DHCP server is not available.
l Network-storage: To provide access to the storage devices attached to the controller.
l Printer-server: To provide access to printers attached to the controller.
Example
The following command enables the DHCP server in the controller:
(host) (config) #service dhcp
The following command enables the NAS services in the controller:
(host) (config) #service network-storage
The following command enables the printer services in the controller:
(host) (config) #service print-server
Command History
The DHCP command was introduced in ArubaOS 3.0.
The network-storage and print-server options was introduced in ArubaOS 3.4
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide service | 547