Reference Guide

566 | show aaa authentication dot1x Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Value
key as the unicast WEP key.
Use Static Key
If enabled, the controller will use a static key as the
unicast/multicast WEP key.
xSec MTU
Shows the size of the MTU for xSec.
Termination
Shows if 802.1X termination is enabled or disabled
on the controller.
Termination EAP-Type
Shows the current Extensible Authentication
Protocol (EAP) method, either EAP-PEAP or EAP-
TLS.
Termination Inner EAP-Type
When EAP-PEAP is the EAP method, this parameter
displays the inner EAP type.
Enforce Suite-B 128 bit or more security level
Authentication
Shows if Suite-B 128 bit or more security level
authentication enforcement is enabled or disabled.
Enforce Suite-B 192 bit security level
Authentication
Shows if Suite-B 192 bit or more security level
authentication enforcement is enabled or disabled.
Token Caching
If this feature enabled (and EAP-GTC is configured as
the inner EAP method), token caching allows the
controller to cache the username and password of
each authenticated user.
Token Caching Period
Timeout period, in hours, for the cached information.
CA-Certificate
Name of the CA certificate for client authentication
loaded in the controller.
Server-Certificate
Name of the Server certificate used by the controller
to authenticate itself to the client.
TLS Guest Access
Shows if guest access for valid EAP-TLS users is
enabled or disabled.
TLS Guest Role
User role assigned to EAP-TLS guest.
Ignore EAPOL-START after authentication
If enabled, the controller ignores EAPOL-START
messages after authentication.
Handle EAPOL-Logoff
Shows if handling of EAPOL-LOGOFF messages is
enabled or disabled.
Ignore EAP ID during negotiation
If enabled, the controller will Ignore EAP IDs during
negotiation.
WPA-Fast-Handover
Shows if WPA-fast-handover is enabled or disabled.
This feature is only applicable for phones that
support WPA.
Disable rekey and reauthentication for clients
on call
Shows if the rekey and reauthentication features for
voice-over-WLAN clients has been enabled or
disabled.