Reference Guide

show aaa dns-query-interval
show aaa dns-query-interval <minutes>
Description
View the configured interval between DNS requests sent from the controller to the DNS server.
Syntax
No parameters
Usage Guidelines
If you define a RADIUS server using the FQDN of the server rather than its IP address, the controller will
periodically generate a DNS request and cache the IP address returned in the DNS response. By default, DNS
requests are sent every 15 minute, but the interval can be changed using the aaa dns-query-period command. Issue
the show aaa dns-query-period command to view the current DNS query interval.
Example
This command shows that the controller will send a DNS query every 30 minutes
(host) # show aaa dns-query-period
DNS Query Interval = 30 minutes
Related Commands
To configure the DNS query interval, issue the command aaa dns-query-interval.
Command History
This command was available in ArubaOS 6.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on local and master
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show aaa dns-query-interval | 607