Reference Guide

608 | show aaa fqdn-server-names Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show aaa fqdn-server-names
show aaa fqdn-server-names
Description
Show a table of IP addresses that have been mapped to fully qualified domain names (FQDNs).
Syntax
No parameters.
Usage Guidelines
If you define a RADIUS server using the FQDN of the server rather than its IP address, the controller will
periodically generate a DNS request and cache the IP address returned in the DNS response. Issue this command to
view the IP addreses that currently correlate to each RADIUS server FQDN.
Example
The output of this command shows the IP addresses for two RADIUS servers.
(host) #show aaa fqdn-server-names
Auth Server FQDN names
---------------------
FQDN IP Address Refcount
---- ---------- --------
myhost1.example.com 192.0.2.3 2myhost2.example.com 192.0.2.5 3
Related Commands
To configure a RADIUS authentication server using that server’s fully qualified domain name, use the command aaa
authentication-server radius.
Command History
This command was available in ArubaOS 6.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on local and master
controllers