Reference Guide

626 | show aaa state configuration DellPowerConnect W-Series ArubaOS 6.2 | Reference Guide
The output of the show aaa state configuration command includes the following parameters:
Parameter Description
Switch IP
IP address of the local controller.
Master IP
IP address of the master controller.
Switch Role
Role assigned to the controller on which you issued the show aaa state
command.
Current/Max/Total IPv4 Users
Current number of IPv4 users on the controller/Maximum number of IPv4 users
that can be assigned to the controller at any time/Total number of IPv4 users that
have been assigned to the controller since the last controller reboot.
Current/Max/Total IPv6 Users
Current number of IPv6 users on the controller/Maximum number of IPv6 users
that can be assigned to the controller at any time/Total number of IPv6 users that
have been assigned to the controller since the last controller reboot.
Current/Max/Total Users
Current number of users on the controller/Maximum number of users that can be
assigned to the controller at any time/Total number of users that have been
assigned to the controller since the last controller reboot.
Current/Max/Total Stations
Current number of stations registered with the controller/Maximum number of
stations that can be registered with the controller at any time/Total number of
stations that have registered the controller since the last controller reboot.
Captive Portal Users
Number of current users authenticated via captive portal.
802.1x Users
Number of current users authenticated via 802.1X authentication.
VPN Users
Number of current users authenticated via VPN authentication.
MAC Users
Number of current users authenticated via MAC authentication.
Stateful 802.1x Users
Number of current users authenticated via stateful 802.1X authentication.
Tunneled users
Number of stations in tunneled forwarding mode, where 802.11 frames are
tunneled to the controller using generic routing encapsulation (GRE).
Configured user roles
Number of configured user roles.
Configured session ACL
Number of configured session ACLs.
Configured destinations
Number of destinations configured using the netdestination command.
Configured services
Number of service aliases configured using the netservice command.
Configured Auth servers
Number of configured authentication servers.
Auth server in service
Number of authentication servers currently in service.
Radius server timeouts
Number of times the RADIUS server did not respond to the authentication
request.
Web
Total number of captive portal authentications or authentication failures since
the last controller reset.