Reference Guide

Command Parameter Description
over trigger settings are now configured using the handover trigger pro-
file.
wlan ssid-profile
The following parameters were introduced:
l dot11r-profile
l bSec-128
l bSec-256
l advertise-location
l enforce-user-vlan
Deprecated Commands
The following commands were deprecated in ArubaOS 6.2:
Command Description
papi-security (deprecated)
The papi-security command configure a key on the master controller
which then distributes it to other controllers and APs, thus allowing each
site to have a unique key.
pcap (deprecated)
Name changed to ap packet capture.
policer-profile (deprecated)
This command configures a Policer profile to manage the transmission
rate of a class of traffic based on user-defined criteria
firewall
This clears the datapath sessions when roles are updated.
local-userdb-ap add
This command adds a Remote AP entry to the Remote AP whitelist table.
local-userdb-ap del
This command deletes a Remote AP entry from the Remote AP whitelist
table.
local-userdb-ap modify
This command modifies a Remote AP entry in the Remote AP whitelist
table.
local-userdb-ap revoke
Revoke a lost or stolen remote AP to prevent unauthorized users from
accessing the company's corporate network.
qos-profile (deprecated)
This command configures a QoS profile to assign TC/DP, DSCP, and
802.1p values to an interface or policer profile.
show papi-security (deprecated)
Shows a configured papi-security profile.
show policer-profile (deprecated)
This command displays the policer profile configuration.
show qos-profile (deprecated)
This command displays the QoS profile configuration.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide Introduction | 7