Reference Guide

R = Remote AP; I = Inactive; X = Maintenance Mode; P = PPPoE AP
S = RFprotect Sensor; d = Disconnected Sensor; H = Using 802.11n license
M = Mesh node; Y = Mesh Recovery i = Indoor; o = Outdoor
Total APs:15
Related Commands
Command Description Mode
show ap database-summary
To display a more general summary overview of the
AP registered to a controller, use the command show
ap database-summary.
Enable and Config
modes
Command History
Version Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.2 The usb parameter was introduced
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap database | 711