Reference Guide

show ap debug bss-stats
show ap debug bss-stats [bssid <bssid>]
Description
Show debug and troubleshooting statistics from a specific BSSID of an AP.
Syntax
Parameter Description
bssid <bssid>
Show data for a specific Basic Service Set Identifier (BSSID) on an AP. An AP’s BSSID is
usually the AP’s MAC address.
Examples
The example below shows part of the output of the command show ap debug bss-stats bssid <bssid>.
(host) #show ap debug bss-stats bssid 00:1a:1e:11:5f:11
BSSID Stats
-----------
Parameter Value
--------- -----
------------------- General Per-radio Statistics
------------------- Transmit specific Statistics
Frames Rcvd For TX 4263
Tx Frames Dropped 613
Frames Transmitted 3650
Success With Retry 0
Tx Mgmt Frames 451975
Beacons Transmitted 447712
Tx Probe Responses 4263
Tx Data Frames 0
Multicast Data 0
Tx CTS Frames 0
Dropped After Retry 613
Dropped No Buffer 0
Missed ACKs 613
Long Preamble 4263
Short Preamble 0
Tx EAPOL Frames 0
Tx 6 Mbps 3650
Tx WMM [VO] 4263
UAPSD OverflowDrop 0
------------------- Receive specific Statistics
Last SNR 0
Last ACK SNR 23
Last ACK SNR CTL0 15
Last ACK SNR CTL1 22
Last ACK SNR CTL2 15
The output of this command includes the following information:
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap debug bss-stats | 717