Reference Guide

Parameter Description
Max Associations
The maximum number of clients allowed to associated with the AP
Wireless Multimedia (WMM)
Shows if Wireless Multimedia (WMM) is enabled or disabled for this AP.
WMM provides prioritization of specific traffic relative to other traffic in the
network.
WMM TSPEC Min Inactivity
Interval
Displays the minimum inactivity time-out threshold of WMM traffic for this AP.
DSCP mapping for WMM voice AC
Displays the DSCP value used to map WMM voice traffic.
DSCP mapping for WMM video AC
Displays the DSCP value used to map WMM video traffic.
DSCP mapping for WMM best-
effort AC
Displays the DSCP value used to map WMM best-effort traffic
DSCP mapping for WMM
background AC
Displays the DSCP value used to map WMM background traffic.
Hide SSID
Shows if the feature to hide a SSID name in beacon frames is enabled or
disabled.
Deny_Broadcast Probes
When a client sends a broadcast probe request frame to search for all
available SSIDs, this option controls whether or not the system responds for
this SSID. When enabled, no response is sent and clients have to know the
SSID in order to associate to the SSID. When disabled, a probe response
frame is sent for this SSID.
Local Probe Response
Shows if local probe response is enabled or disabled on the AP. If this option
is enabled, the AP is responsible for sending 802.11 probe responses to
wireless clients’ probe requests. If this option is disabled, then the controller
sends the 802.11 probe responses
Disable Probe Retry
Shows if the AP has enabled or disabled MAC-level retries for probe response
frames. By default this parameter is enabled, which mean that MAC level
retries for probe response frames is disabled.
Maximum Transmit Failures
Display the maximum number of transmission failures allowed before the
client gives up.
BC/MC Rate Optimization
Shows if the AP has enabled or disabled scanning of all active stations
currently associated to that AP to select the lowest transmission rate for
broadcast and multicast frames. This option only applies to broadcast and
multicast data frames; 802.11 management frames are transmitted at the
lowest configured rate.
High throughput enable (SSID)
Shows if the AP has enabled or disabled the use of its high-throughput SSID in
40 MHz mode.
40 MHz channel usage
Determines if this high-throughput SSID allows high-throughput (802.11n)
stations to associate.
MPDU Aggregation
Shows if the AP has enabled or disabled MAC protocol data unit (MDPU)
aggregation.
Max transmitted A-MPDU size
Shows the maximum size, in bytes, of an A-MPDU that can be sent on the AP’s
high-throughput SSID.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap debug received-config | 747