Reference Guide

show ap mesh-cluster-profile
show ap mesh-cluster-profile [<profile>]
Description
Show configuration settings for a mesh cluster profile.
Syntax
Parameter Description
<profile>
Name of a mesh cluster profile
Usage Guidelines
The command show ap mesh-cluster-profile displays a list of all mesh cluster profiles configured on the controller,
including the number of references to each profile and each profile’s status. Include the optional <profile>
parameter to show detailed settings for an individual mesh cluster profile.
Examples
The example below shows the configuration settings for the mesh cluster profile “meshcluster2”.
(host) #show ap mesh-cluster-profile meshcluster2
Mesh Cluster profile "meshcluster2"
------------------------------
Parameter Value
--------- -----
Cluster Name company-mesh
RF Band a
Encryption opensystem
WPA Hexkey N/A
WPA Passphrase N/A
The output of this command includes the following information:
Parameter Description
Cluster Name
Name of the mesh cluster using this profile
RF band
The RF band in which the AP should operate:
l g = 2.4 GHz
l a = 5 GHz
Encryption
Data encryption setting for the mesh cluster profile.
l opensystem—No authentication and encryption.
l wpa2-psk-aes—WPA2 with AES encryption using a preshared key.
WPA Hexkey
The WPA pre-shared key (only for mesh cluster profiles using WPA2 with AES encryption).
WPA Passphrase
The WPA password that generates the preshared key (only for mesh cluster profiles using
WPA2 with AES encryption).
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap mesh-cluster-profile | 783