Reference Guide

804 | show ap mesh topology Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show ap mesh topology
show ap mesh topology [long] [page <page>] [start <start>]
Description
Show the mesh topology tree.
Syntax
Parameter Description
long
Include the names of a mesh portal’s children in the output of this command
page <page>
Limit the output of this command to a specific number of entries by entering the number of
entries you want to display.
start <start>
Start displaying the mesh topology tree at a chosen index number by entering the index
number of the AP at which command output should start.
Example
An (N) in the Mesh Role column indicates the node is 11N capable. An (N) beside the parent name in the Parent
column indicates that the mesh node’s the parent is also 11N capable.
(host) #show ap mesh topology
Mesh Cluster Name: sw-ad-GB32
-----------------------------
Name Mesh Role Parent Path Cost Node Cost Link Cost Hop Count RSSI Rate Tx/Rx
---- --------- ------ --------- --------- --------- --------- ---- ----------
Last Update Uplink Age #Children
----------- ---------- ---------
ad-ap Point (N) mp3 2 0 0 1 61 300/270
6m:12s 3h:8m:7s 0
msc-1 Point mp3 2 0 0 1 64 54/54
6m:36s 2h:48m:12s 0
Total APs :2
(R): Recovery AP. (N): 11N Enabled. For Portals 'Uplink Age' equals uptime.
The output of this command includes the following information:
Column Description
Name
Name of the mesh node.