Reference Guide

show ap packet-capture status
show ap packet-capture status <ap-name|ip-addr|ip6-addr>
Description
This command shows detailed packet capture (PCAP) session information for Dell APs.
Syntax
Parameter Description
ap-name
AP name for which you are requesting packet capture status information.
ip-addr
IP address of the AP for which you are requesting packet capture status information.
ip6-addr
IP6 address of the AP for which you are requesting packet capture status information.
Usage Guidelines
This is the show version for the ap packet-capture commands, used to direct an Dell AP to send packet captures to a
client packet capture utility such as Airmagnet, Wireshark and so on, on a remote client.
Example
#show ap packet-capture status ap-name ap1
Packet Capture Sessions at ap1, IP 10.3.44.167
----------------------------------------------
pcap-id filter type intf channel max-pkts
------- ------ ---- ---- ------- --------
1 type eq all interactive 6c:f3:7f:ba:65:70 153 0
max-pkt-size num-pkts status url target Radio ID
------------ -------- ------ ------ ------
65536 3759 in-progress 192.168.0.3/5555 0
Related Commands
For a complete list of packet capture (pcap) commands and usage guidelines, see ap packet-capture .
Command History
Version Change
ArubaOS6.2 Name changed from pcap to ap packet capture.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap packet-capture status | 821