Reference Guide

830 | show ap provisioning-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description
Password of AP so that AP can authenticate
to 802.1x using PEAP
If your AP uses PEAP authentication, this field displays the AP
password.
Uplink VLAN
If you configured an uplink VLAN on an AP connected to a port
in trunk mode, the AP sends and receives frames tagged with
this VLAN on its Ethernet uplink.
By default, an AP has an uplink vlan of 0, which disables this
feature.
Usage Guidelines
The AP provisioning profile allows you to define a set of provisioning parameters to an AP group. These settings can
be saved or assigned to an AP group via the command ap-group <group> provisioning-profile <profile>.
Related Commands
Command Description
provision-ap
Change provisioning parameters for an individual AP. This command does not save the
provisioning parameters settings in a reusable profile.
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.0 The uplink-vlan parameter was introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers